Choose From Our Standard to Comprehensive Jet Fuel Testing

Choose From Our Standard to Comprehensive Jet Fuel Testing

Primary Jet Fuel Packages
ASTM Test Methods Standard
16oz / 500ml 		Mission Critical
32oz / 1000ml 		Comprehensive
64oz / 1500ml

This test method covers the determination of total sulfur in liquid hydrocarbons, boiling in the range from approximately 25 °C to 400 °C, with viscosities between approximately 0.2 cSt and 20 cSt (mm2/s) at room temperature.

Sulfur
 		D5453 ✓ ✓ ✓

This test method covers the laboratory determination using a glass hydrometer in conjunction with a series of calculations, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures of petroleum and nonpetroleum products normally handled as liquids, and having a Reid vapor pressure of 101.325 kPa (14.696 psi) or less. Values are determined at existing temperatures and corrected to 15 °C or 60 °F by means of a series of calculations and international standard tables.

Density
 		D7777 ✓ ✓ ✓

This test method covers two procedures for estimating the presence of suspended free water and solid particulate contamination in distillate fuels having distillation end points below 400 °C and an ASTM color of 5 or less.

Visual Appearance
 		D4176 ✓ ✓ ✓

This test method is designed to assess the relative degree of corrosivity of a petroleum product. (Accelerated method)

Copper Corrosion
 		D7095 ✓ ✓ ✓

This test method covers the direct determination of entrained water in petroleum products and hydrocarbons using automated instrumentation. This test method also covers the indirect analysis of water thermally removed from samples and swept with dry inert gas into the Karl Fischer titration cell. Mercaptan, sulfide (S– or H2S), sulfur, and other compounds are known to interfere with this test method (see Section 6). The precision statement of this method covers the nominal range of 20 mg/kg to 25 000 mg/kg for Procedure A, 30 mg/kg to 2100 mg/kg for Procedure B, and 20 mg/kg to 360 mg/kg for Procedure C.

Water by Karl Fischer
 		D6304 ✓ ✓ ✓

This test method covers the atmospheric distillation of petroleum products using a laboratory batch distillation unit to determine quantitatively the boiling range characteristics of such products as light and middle distillates, automotive spark-ignition engine fuels with or without oxygenates (see Note 1), aviation gasoline, aviation turbine fuels, diesel fuels, biodiesel blends up to 20 %, marine fuels, special petroleum spirits, naphthas, white spirits, kerosines, and Grades 1 and 2 burner fuels.

Distillation
 		D86 ✓ ✓ ✓

This test method covers the determination of the volume of free water and sediment (as a percentage of the sample) that is suspended in the bulk fuel in middle distillate fuels with viscosities in the range of 1.0 mm2/s to 4.1 mm2/s at 40 °C (1.0 cSt to 4.1 cSt at 104 °F) and densities in the range of 770 kg/m3 to 900 kg/m3 at 15 °C.

Water and Sediment
 		D2709 ✓ ✓

This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system.

Oxidation Stability
 		D3241 ✓ ✓

These test methods cover the determination of the electrical conductivity of aviation and distillate fuels with and without a static dissipator additive. The test methods normally give a measurement of the conductivity when the fuel is uncharged, that is, electrically at rest (known as the rest conductivity).

Conductivity
 		D2624 ✓ ✓

This test method covers the determination of the temperature below which solid hydrocarbon crystals may form in aviation turbine fuels and aviation gasoline.

Freeze Point
 		D2386 ✓ ✓

This test method covers the estimation of the net heat of combustion at constant pressure in metric (SI) units, megajoules per kilogram.This test method is purely empirical, and it is applicable only to liquid hydrocarbon fuels derived by normal refining processes from conventional crude oil which conform to the requirements of specifications for aviation gasolines or aircraft turbine and jet engine fuels of limited boiling ranges and compositions.

Net Heat of Combustion
 		D4529 ✓

This test method covers a rapid portable means for field and laboratory use to rate the ability of aviation turbine fuels to release entrained or emulsified water when passed through fiberglass coalescing material.

Water Separation
 		D3948 ✓

This test method covers the determination of the existent gum content of aviation fuels, and the gum content of motor gasoline or other volatile distillates in their finished form, (including those containing alcohol and ether type oxygenates and deposit control additives) at the time of the test.

Existent Gum
 		D381 ✓

Primary Jet Fuel Packages

ASTM Test Methods

Standard
16oz / 500ml

This test method covers the determination of total sulfur in liquid hydrocarbons, boiling in the range from approximately 25 °C to 400 °C, with viscosities between approximately 0.2 cSt and 20 cSt (mm2/s) at room temperature.

Sulfur
 		D5453 ✓

This test method covers the laboratory determination using a glass hydrometer in conjunction with a series of calculations, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures of petroleum and nonpetroleum products normally handled as liquids, and having a Reid vapor pressure of 101.325 kPa (14.696 psi) or less. Values are determined at existing temperatures and corrected to 15 °C or 60 °F by means of a series of calculations and international standard tables.

Density
 		D7777 ✓

This test method covers two procedures for estimating the presence of suspended free water and solid particulate contamination in distillate fuels having distillation end points below 400 °C and an ASTM color of 5 or less.

Visual Appearance
 		D4176 ✓

This test method is designed to assess the relative degree of corrosivity of a petroleum product. (Accelerated method)

Copper Corrosion
 		D7095 ✓

This test method covers the direct determination of entrained water in petroleum products and hydrocarbons using automated instrumentation. This test method also covers the indirect analysis of water thermally removed from samples and swept with dry inert gas into the Karl Fischer titration cell. Mercaptan, sulfide (S– or H2S), sulfur, and other compounds are known to interfere with this test method (see Section 6). The precision statement of this method covers the nominal range of 20 mg/kg to 25 000 mg/kg for Procedure A, 30 mg/kg to 2100 mg/kg for Procedure B, and 20 mg/kg to 360 mg/kg for Procedure C.

Water by Karl Fischer
 		D6304 ✓

This test method covers the atmospheric distillation of petroleum products using a laboratory batch distillation unit to determine quantitatively the boiling range characteristics of such products as light and middle distillates, automotive spark-ignition engine fuels with or without oxygenates (see Note 1), aviation gasoline, aviation turbine fuels, diesel fuels, biodiesel blends up to 20 %, marine fuels, special petroleum spirits, naphthas, white spirits, kerosines, and Grades 1 and 2 burner fuels.

Distillation
 		D86 ✓

This test method covers the determination of the volume of free water and sediment (as a percentage of the sample) that is suspended in the bulk fuel in middle distillate fuels with viscosities in the range of 1.0 mm2/s to 4.1 mm2/s at 40 °C (1.0 cSt to 4.1 cSt at 104 °F) and densities in the range of 770 kg/m3 to 900 kg/m3 at 15 °C.

Water and Sediment
 		D2709

This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system.

Oxidation Stability
 		D3241

These test methods cover the determination of the electrical conductivity of aviation and distillate fuels with and without a static dissipator additive. The test methods normally give a measurement of the conductivity when the fuel is uncharged, that is, electrically at rest (known as the rest conductivity).

Conductivity
 		D2624

This test method covers the determination of the temperature below which solid hydrocarbon crystals may form in aviation turbine fuels and aviation gasoline.

Freeze Point
 		D2386

This test method covers the estimation of the net heat of combustion at constant pressure in metric (SI) units, megajoules per kilogram.This test method is purely empirical, and it is applicable only to liquid hydrocarbon fuels derived by normal refining processes from conventional crude oil which conform to the requirements of specifications for aviation gasolines or aircraft turbine and jet engine fuels of limited boiling ranges and compositions.

Net Heat of Combustion
 		D4529

This test method covers a rapid portable means for field and laboratory use to rate the ability of aviation turbine fuels to release entrained or emulsified water when passed through fiberglass coalescing material.

Water Separation
 		D3948

This test method covers the determination of the existent gum content of aviation fuels, and the gum content of motor gasoline or other volatile distillates in their finished form, (including those containing alcohol and ether type oxygenates and deposit control additives) at the time of the test.

Existent Gum
 		D381
Mission Critical
32oz / 1000ml

This test method covers the determination of total sulfur in liquid hydrocarbons, boiling in the range from approximately 25 °C to 400 °C, with viscosities between approximately 0.2 cSt and 20 cSt (mm2/s) at room temperature.

Sulfur
 		D5453 ✓

This test method covers the laboratory determination using a glass hydrometer in conjunction with a series of calculations, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures of petroleum and nonpetroleum products normally handled as liquids, and having a Reid vapor pressure of 101.325 kPa (14.696 psi) or less. Values are determined at existing temperatures and corrected to 15 °C or 60 °F by means of a series of calculations and international standard tables.

Density
 		D7777 ✓

This test method covers two procedures for estimating the presence of suspended free water and solid particulate contamination in distillate fuels having distillation end points below 400 °C and an ASTM color of 5 or less.

Visual Appearance
 		D4176 ✓

This test method is designed to assess the relative degree of corrosivity of a petroleum product. (Accelerated method)

Copper Corrosion
 		D7095 ✓

This test method covers the direct determination of entrained water in petroleum products and hydrocarbons using automated instrumentation. This test method also covers the indirect analysis of water thermally removed from samples and swept with dry inert gas into the Karl Fischer titration cell. Mercaptan, sulfide (S– or H2S), sulfur, and other compounds are known to interfere with this test method (see Section 6). The precision statement of this method covers the nominal range of 20 mg/kg to 25 000 mg/kg for Procedure A, 30 mg/kg to 2100 mg/kg for Procedure B, and 20 mg/kg to 360 mg/kg for Procedure C.

Water by Karl Fischer
 		D6304 ✓

This test method covers the atmospheric distillation of petroleum products using a laboratory batch distillation unit to determine quantitatively the boiling range characteristics of such products as light and middle distillates, automotive spark-ignition engine fuels with or without oxygenates (see Note 1), aviation gasoline, aviation turbine fuels, diesel fuels, biodiesel blends up to 20 %, marine fuels, special petroleum spirits, naphthas, white spirits, kerosines, and Grades 1 and 2 burner fuels.

Distillation
 		D86 ✓

This test method covers the determination of the volume of free water and sediment (as a percentage of the sample) that is suspended in the bulk fuel in middle distillate fuels with viscosities in the range of 1.0 mm2/s to 4.1 mm2/s at 40 °C (1.0 cSt to 4.1 cSt at 104 °F) and densities in the range of 770 kg/m3 to 900 kg/m3 at 15 °C.

Water and Sediment
 		D2709 ✓

This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system.

Oxidation Stability
 		D3241 ✓

These test methods cover the determination of the electrical conductivity of aviation and distillate fuels with and without a static dissipator additive. The test methods normally give a measurement of the conductivity when the fuel is uncharged, that is, electrically at rest (known as the rest conductivity).

Conductivity
 		D2624 ✓

This test method covers the determination of the temperature below which solid hydrocarbon crystals may form in aviation turbine fuels and aviation gasoline.

Freeze Point
 		D2386 ✓

This test method covers the estimation of the net heat of combustion at constant pressure in metric (SI) units, megajoules per kilogram.This test method is purely empirical, and it is applicable only to liquid hydrocarbon fuels derived by normal refining processes from conventional crude oil which conform to the requirements of specifications for aviation gasolines or aircraft turbine and jet engine fuels of limited boiling ranges and compositions.

Net Heat of Combustion
 		D4529

This test method covers a rapid portable means for field and laboratory use to rate the ability of aviation turbine fuels to release entrained or emulsified water when passed through fiberglass coalescing material.

Water Separation
 		D3948

This test method covers the determination of the existent gum content of aviation fuels, and the gum content of motor gasoline or other volatile distillates in their finished form, (including those containing alcohol and ether type oxygenates and deposit control additives) at the time of the test.

Existent Gum
 		D381
Comprehensive
64oz / 1500ml

This test method covers the determination of total sulfur in liquid hydrocarbons, boiling in the range from approximately 25 °C to 400 °C, with viscosities between approximately 0.2 cSt and 20 cSt (mm2/s) at room temperature.

Sulfur
 		D5453 ✓

This test method covers the laboratory determination using a glass hydrometer in conjunction with a series of calculations, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures of petroleum and nonpetroleum products normally handled as liquids, and having a Reid vapor pressure of 101.325 kPa (14.696 psi) or less. Values are determined at existing temperatures and corrected to 15 °C or 60 °F by means of a series of calculations and international standard tables.

Density
 		D7777 ✓

This test method covers two procedures for estimating the presence of suspended free water and solid particulate contamination in distillate fuels having distillation end points below 400 °C and an ASTM color of 5 or less.

Visual Appearance
 		D4176 ✓

This test method is designed to assess the relative degree of corrosivity of a petroleum product. (Accelerated method)

Copper Corrosion
 		D7095 ✓

This test method covers the direct determination of entrained water in petroleum products and hydrocarbons using automated instrumentation. This test method also covers the indirect analysis of water thermally removed from samples and swept with dry inert gas into the Karl Fischer titration cell. Mercaptan, sulfide (S– or H2S), sulfur, and other compounds are known to interfere with this test method (see Section 6). The precision statement of this method covers the nominal range of 20 mg/kg to 25 000 mg/kg for Procedure A, 30 mg/kg to 2100 mg/kg for Procedure B, and 20 mg/kg to 360 mg/kg for Procedure C.

Water by Karl Fischer
 		D6304 ✓

This test method covers the atmospheric distillation of petroleum products using a laboratory batch distillation unit to determine quantitatively the boiling range characteristics of such products as light and middle distillates, automotive spark-ignition engine fuels with or without oxygenates (see Note 1), aviation gasoline, aviation turbine fuels, diesel fuels, biodiesel blends up to 20 %, marine fuels, special petroleum spirits, naphthas, white spirits, kerosines, and Grades 1 and 2 burner fuels.

Distillation
 		D86 ✓

This test method covers the determination of the volume of free water and sediment (as a percentage of the sample) that is suspended in the bulk fuel in middle distillate fuels with viscosities in the range of 1.0 mm2/s to 4.1 mm2/s at 40 °C (1.0 cSt to 4.1 cSt at 104 °F) and densities in the range of 770 kg/m3 to 900 kg/m3 at 15 °C.

Water and Sediment
 		D2709 ✓

This test method covers the procedure for rating the tendencies of gas turbine fuels to deposit decomposition products within the fuel system.

Oxidation Stability
 		D3241 ✓

These test methods cover the determination of the electrical conductivity of aviation and distillate fuels with and without a static dissipator additive. The test methods normally give a measurement of the conductivity when the fuel is uncharged, that is, electrically at rest (known as the rest conductivity).

Conductivity
 		D2624 ✓

This test method covers the determination of the temperature below which solid hydrocarbon crystals may form in aviation turbine fuels and aviation gasoline.

Freeze Point
 		D2386 ✓

This test method covers the estimation of the net heat of combustion at constant pressure in metric (SI) units, megajoules per kilogram.This test method is purely empirical, and it is applicable only to liquid hydrocarbon fuels derived by normal refining processes from conventional crude oil which conform to the requirements of specifications for aviation gasolines or aircraft turbine and jet engine fuels of limited boiling ranges and compositions.

Net Heat of Combustion
 		D4529 ✓

This test method covers a rapid portable means for field and laboratory use to rate the ability of aviation turbine fuels to release entrained or emulsified water when passed through fiberglass coalescing material.

Water Separation
 		D3948 ✓

This test method covers the determination of the existent gum content of aviation fuels, and the gum content of motor gasoline or other volatile distillates in their finished form, (including those containing alcohol and ether type oxygenates and deposit control additives) at the time of the test.

Existent Gum
 		D381 ✓

Jet Fuel Testing

You compromise the safety and performance of jets if you skip jet fuel testing. ASAP Labs understands this, so we offer fast, convenient, and accurate testing.

Our commitment to excellence ensures you receive your results within 72 hours, surpassing industry norms for speed without compromising on accuracy.

Our testing adheres to strict ASTM jet fuel testing standards, so you can trust in its quality. When you partner with ASAP Labs, you partner with over 30 years of industry experience, state-of-the-art equipment, and a commitment to quality from the top down.

Explore our testing packages today. For questions or more information, call 1-844-272-7400 or email [email protected].