Offering Various Diesel Fuel Testing Packages

Offering Various Diesel Fuel Testing Packages

Primary Diesel Fuel Packages
ASTM Test Methods Standard
5oz / 147ml 		Mission Critical
5oz / 147ml 		Comprehensive
10oz / 300ml

This test method covers the determination of the density, relative density, or API gravity of liquid petroleum products using portable digital density meters at test temperatures between 0 and 40°C (32 to 104°F). Its application is restricted to samples with a dry vapor pressure equivalent up to 80 kPa (11.6 psi) and a viscosity below 100 mm2/s (cSt) at the test temperature.

API Gravity
 		D7777 ✓ ✓ ✓

This test method covers two procedures for estimating the presence of suspended free water and solid particulate contamination in distillate fuels having distillation end points below 400 °C and an ASTM color of 5 or less.

Visual Appearance
 		D4176 ✓ ✓ ✓
Microbial Growth
D6469 ✓ ✓ ✓

This test method covers the direct determination of entrained water in petroleum products and hydrocarbons using automated instrumentation. This test method also covers the indirect analysis of water thermally removed from samples and swept with dry inert gas into the Karl Fischer titration cell. Mercaptan, sulfide (S– or H2S), sulfur, and other compounds are known to interfere with this test method. The precision statement of this method covers the nominal range of 20 mg/kg to 25 000 mg/kg for Procedure A, 30 mg/kg to 2100 mg/kg for Procedure B, and 20 mg/kg to 360 mg/kg for Procedure C.

Water by Karl Fischer
 		D6304 ✓ ✓ ✓

This method is useful in determining the boiling point of a petroleum product, useful for determining possible cross contamination or mixtures % in fuels.

Distillation
 		D2887 ✓ ✓ ✓

This test method covers determination of flash point in products within a acceptable range for Diesel with 2ML of fuel.

Flash Point
 		D7236 ✓ ✓ ✓

This test method covers the determination of the content of biodiesel (fatty acid methyl esters (FAME)) in diesel fuel oils for volume fractions of 0.1 % to 31.0 % by a mid-infrared analyzer with a resolution of 0.1 %.

NOTE 1: ASTM and ISO specification fuels falling within the scope of this test method include Specifications: D975 grades No. 1D and No. 2D, D7467, distillate grades of D396, MIL-DTL-16884, and distillate grades of marine fuel specification ISO 8217.

Biodiesel Content
 		D8274 ✓ ✓ ✓

This test method covers the determination of total sulfur in liquid hydrocarbons, boiling in the range from approximately 25 °C to 400 °C, with viscosities between approximately 0.2 cSt and 20 cSt (mm2/s) at room temperature.

Sulfur
 		D5453 ✓ ✓

This test method covers the determination of the volume of free water and sediment (as a percentage of the sample) that is suspended in the bulk fuel in middle distillate fuels with viscosities in the range of 1.0 mm2/s to 4.1 mm2/s at 40 °C (1.0 cSt to 4.1 cSt at 104 °F) and densities in the range of 770 kg/m3 to 900 kg/m3 at 15 °C.

Water and Sediment
 		D2709 ✓ ✓

This test method covers the Calculated Cetane Index formula, which represents a means for directly estimating the ASTM cetane number of distillate fuels from API gravity and mid-boiling point.

Cetane Index
D976 ✓ ✓

This test method This test method is designed to assess the relative degree of corrosivity of a petroleum product. (Accelerated method)

Copper Corrosion
 		D7095 ✓ ✓

This test method covers relative stability of middle distillate fuels under high temperature aging conditions with limited air exposure. This test method is suitable for all No. 1 and No. 2 grades in Specifications D396, D975, D2880, and D3699. It is also suitable for similar fuels meeting other specifications.

Thermal Stability
 		D6468 ✓

This test method covers only petroleum products and biodiesel fuels that are transparent in layers 40 mm in thickness, and with a cloud point below 49 °C.

Cloud Point
 		D7689 ✓

This test method measures the lowest temperature of usability for diesel.

Pour Point
 		D5950 ✓

The international standard ISO 4406, “Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles” provides a framework for reporting the concentration of contamination particles in hydraulic oil using an automatic particle counter.

Particle Count
 		ISO 4406 ✓

Primary Diesel Fuel Packages

ASTM Test Methods

Standard
5oz / 147ml

This test method covers the determination of the density, relative density, or API gravity of liquid petroleum products using portable digital density meters at test temperatures between 0 and 40°C (32 to 104°F). Its application is restricted to samples with a dry vapor pressure equivalent up to 80 kPa (11.6 psi) and a viscosity below 100 mm2/s (cSt) at the test temperature.

API Gravity
 		D7777 ✓

This test method covers two procedures for estimating the presence of suspended free water and solid particulate contamination in distillate fuels having distillation end points below 400 °C and an ASTM color of 5 or less.

Visual Appearance
 		D4176 ✓
Microbial Growth
D6469 ✓

This test method covers the direct determination of entrained water in petroleum products and hydrocarbons using automated instrumentation. This test method also covers the indirect analysis of water thermally removed from samples and swept with dry inert gas into the Karl Fischer titration cell. Mercaptan, sulfide (S– or H2S), sulfur, and other compounds are known to interfere with this test method. The precision statement of this method covers the nominal range of 20 mg/kg to 25 000 mg/kg for Procedure A, 30 mg/kg to 2100 mg/kg for Procedure B, and 20 mg/kg to 360 mg/kg for Procedure C.

Water by Karl Fischer
 		D6304 ✓

This method is useful in determining the boiling point of a petroleum product, useful for determining possible cross contamination or mixtures % in fuels.

Distillation
 		D2887 ✓

This test method covers determination of flash point in products within a acceptable range for Diesel with 2ML of fuel.

Flash Point
 		D7236 ✓

This test method covers the determination of the content of biodiesel (fatty acid methyl esters (FAME)) in diesel fuel oils for volume fractions of 0.1 % to 31.0 % by a mid-infrared analyzer with a resolution of 0.1 %.

NOTE 1: ASTM and ISO specification fuels falling within the scope of this test method include Specifications: D975 grades No. 1D and No. 2D, D7467, distillate grades of D396, MIL-DTL-16884, and distillate grades of marine fuel specification ISO 8217.

Biodiesel Content
 		D8274 ✓
Mission Critical
5oz / 147ml

This test method covers the determination of the density, relative density, or API gravity of liquid petroleum products using portable digital density meters at test temperatures between 0 and 40°C (32 to 104°F). Its application is restricted to samples with a dry vapor pressure equivalent up to 80 kPa (11.6 psi) and a viscosity below 100 mm2/s (cSt) at the test temperature.

API Gravity
 		D7777 ✓

This test method covers two procedures for estimating the presence of suspended free water and solid particulate contamination in distillate fuels having distillation end points below 400 °C and an ASTM color of 5 or less.

Visual Appearance
 		D4176 ✓
Microbial Growth
D6469 ✓

This test method covers the direct determination of entrained water in petroleum products and hydrocarbons using automated instrumentation. This test method also covers the indirect analysis of water thermally removed from samples and swept with dry inert gas into the Karl Fischer titration cell. Mercaptan, sulfide (S– or H2S), sulfur, and other compounds are known to interfere with this test method. The precision statement of this method covers the nominal range of 20 mg/kg to 25 000 mg/kg for Procedure A, 30 mg/kg to 2100 mg/kg for Procedure B, and 20 mg/kg to 360 mg/kg for Procedure C.

Water by Karl Fischer
 		D6304 ✓

This method is useful in determining the boiling point of a petroleum product, useful for determining possible cross contamination or mixtures % in fuels.

Distillation
 		D2887 ✓

This test method covers determination of flash point in products within a acceptable range for Diesel with 2ML of fuel.

Flash Point
 		D7236 ✓

This test method covers the determination of the content of biodiesel (fatty acid methyl esters (FAME)) in diesel fuel oils for volume fractions of 0.1 % to 31.0 % by a mid-infrared analyzer with a resolution of 0.1 %.

NOTE 1: ASTM and ISO specification fuels falling within the scope of this test method include Specifications: D975 grades No. 1D and No. 2D, D7467, distillate grades of D396, MIL-DTL-16884, and distillate grades of marine fuel specification ISO 8217.

Biodiesel Content
 		D8274 ✓

This test method covers the determination of total sulfur in liquid hydrocarbons, boiling in the range from approximately 25 °C to 400 °C, with viscosities between approximately 0.2 cSt and 20 cSt (mm2/s) at room temperature.

Sulfur
 		D5453 ✓

This test method covers the determination of the volume of free water and sediment (as a percentage of the sample) that is suspended in the bulk fuel in middle distillate fuels with viscosities in the range of 1.0 mm2/s to 4.1 mm2/s at 40 °C (1.0 cSt to 4.1 cSt at 104 °F) and densities in the range of 770 kg/m3 to 900 kg/m3 at 15 °C.

Water and Sediment
 		D2709 ✓

This test method covers the Calculated Cetane Index formula, which represents a means for directly estimating the ASTM cetane number of distillate fuels from API gravity and mid-boiling point.

Cetane Index
D976 ✓

This test method This test method is designed to assess the relative degree of corrosivity of a petroleum product. (Accelerated method)

Copper Corrosion
 		D7095 ✓
Comprehensive
10oz / 300ml

This test method covers the determination of the density, relative density, or API gravity of liquid petroleum products using portable digital density meters at test temperatures between 0 and 40°C (32 to 104°F). Its application is restricted to samples with a dry vapor pressure equivalent up to 80 kPa (11.6 psi) and a viscosity below 100 mm2/s (cSt) at the test temperature.

API Gravity
 		D7777 ✓

This test method covers two procedures for estimating the presence of suspended free water and solid particulate contamination in distillate fuels having distillation end points below 400 °C and an ASTM color of 5 or less.

Visual Appearance
 		D4176 ✓
Microbial Growth
D6469 ✓

This test method covers the direct determination of entrained water in petroleum products and hydrocarbons using automated instrumentation. This test method also covers the indirect analysis of water thermally removed from samples and swept with dry inert gas into the Karl Fischer titration cell. Mercaptan, sulfide (S– or H2S), sulfur, and other compounds are known to interfere with this test method. The precision statement of this method covers the nominal range of 20 mg/kg to 25 000 mg/kg for Procedure A, 30 mg/kg to 2100 mg/kg for Procedure B, and 20 mg/kg to 360 mg/kg for Procedure C.

Water by Karl Fischer
 		D6304 ✓

This method is useful in determining the boiling point of a petroleum product, useful for determining possible cross contamination or mixtures % in fuels.

Distillation
 		D2887 ✓

This test method covers determination of flash point in products within a acceptable range for Diesel with 2ML of fuel.

Flash Point
 		D7236 ✓

This test method covers the determination of the content of biodiesel (fatty acid methyl esters (FAME)) in diesel fuel oils for volume fractions of 0.1 % to 31.0 % by a mid-infrared analyzer with a resolution of 0.1 %.

NOTE 1: ASTM and ISO specification fuels falling within the scope of this test method include Specifications: D975 grades No. 1D and No. 2D, D7467, distillate grades of D396, MIL-DTL-16884, and distillate grades of marine fuel specification ISO 8217.

Biodiesel Content
 		D8274 ✓

This test method covers the determination of total sulfur in liquid hydrocarbons, boiling in the range from approximately 25 °C to 400 °C, with viscosities between approximately 0.2 cSt and 20 cSt (mm2/s) at room temperature.

Sulfur
 		D5453 ✓

This test method covers the determination of the volume of free water and sediment (as a percentage of the sample) that is suspended in the bulk fuel in middle distillate fuels with viscosities in the range of 1.0 mm2/s to 4.1 mm2/s at 40 °C (1.0 cSt to 4.1 cSt at 104 °F) and densities in the range of 770 kg/m3 to 900 kg/m3 at 15 °C.

Water and Sediment
 		D2709 ✓

This test method covers the Calculated Cetane Index formula, which represents a means for directly estimating the ASTM cetane number of distillate fuels from API gravity and mid-boiling point.

Cetane Index
D976 ✓

This test method This test method is designed to assess the relative degree of corrosivity of a petroleum product. (Accelerated method)

Copper Corrosion
 		D7095 ✓

This test method covers relative stability of middle distillate fuels under high temperature aging conditions with limited air exposure. This test method is suitable for all No. 1 and No. 2 grades in Specifications D396, D975, D2880, and D3699. It is also suitable for similar fuels meeting other specifications.

Thermal Stability
 		D6468 ✓

This test method covers only petroleum products and biodiesel fuels that are transparent in layers 40 mm in thickness, and with a cloud point below 49 °C.

Cloud Point
 		D7689 ✓

This test method measures the lowest temperature of usability for diesel.

Pour Point
 		D5950 ✓

The international standard ISO 4406, “Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles” provides a framework for reporting the concentration of contamination particles in hydraulic oil using an automatic particle counter.

Particle Count
 		ISO 4406 ✓

Diesel Fuel Testing

Diesel fuel testing is essential for ensuring the longevity and efficiency of your fuel-powered equipment, regardless of your industry. At ASAP Labs, we provide diesel fuel services for fuel quality monitoring, regulation compliance, and troubleshooting your fuel.

Our diesel fuel testing delivers accurate results with 5 ounces of fuel for our mission critical packages—significantly less than the 16 ounces required by most other labs. This saves you money on product and shipping costs.

Additionally, our state-of-the-art equipment and adherence to ASTM diesel fuel testing standards guarantee that you receive your analysis within 72 hours for most diesel fuel testing packages, outpacing industry norms.

With over 30 years of industry experience with diesel fuel testing labs, ASAP Labs combines unparalleled expertise with exceptional customer service. Trust us to provide rapid, reliable insights into your diesel’s quality.

Give us a call at 1-844-272-7400 or email at [email protected] for more information.